To remove the front bezel, first remove the optical drive...

(Roll mouse over image)

(Roll mouse over image)

(Roll mouse over image)

...the rear cover...

(Roll mouse over image)

...and the side caps.

(Roll mouse over image)

Remove the hard drive.

(Roll mouse over image)

Remove the system speakers.

(Roll mouse over image)

Place the PC on a piece of foam that fits within the LCD screen area.

(Roll mouse over image)

Detach the memory reader from the bezel and pull it in towards the middle frame.

(Roll mouse over image)

Also detach the power button from the bezel and pull it in towards the middle frame.

(Roll mouse over image)

Detach the side I/O and pull it in towards the middle frame.

(Roll mouse over image)

Remove the webcam holder.

(Roll mouse over image)

Remove the remaining nine screws securing the front bezel to the middle frame – 2 on the top, 2 on each side, 2 on the bottom, and one in the hard drive bay.

The bezel can now be pulled off of the unit.

(Roll mouse over image)

Lift the middle frame and foam away from the bezel.

(Roll mouse over image)

There are several locator pegs on the sides and top of the front bezel.

The pegs fit into locator holes on the middle frame.

To replace the front bezel, place the main unit with its foam block over the front bezel screen area.

(Roll mouse over image)

Align the bezel onto the main unit.

(Roll mouse over image)

Press the pegs into the holes on the middle frame.

(Roll mouse over image)

Replace the webcam holder at the top of the unit.

(Roll mouse over image)

Replace the side I/O...

(Roll mouse over image)

...the power button...

(Roll mouse over image)

...and the memory reader.

(Roll mouse over image)

Replace the system speakers...

(Roll mouse over image)

...and the hard drive.

(Roll mouse over image)