Print steps

TV Tuner Card removal

Before you begin: First remove the USB dongle cap, the right rear cap, the left rear cap, the stand, the T rear cover, the left side cap and the motherboard shield.

Steps

1. Detach the antenna connector from the card.
2. Detach the two screws from the card. The card will pop up.
3. Pull out the card.

TV Tuner Card replacement

Steps

1. To replace the TV tuner card, angle the card into its slot at a 45 degree angle and press down.
2. Hold it down while replacing the first screw.
3. Replace the other screw
4. Replace the antenna connector to the card.
5. Make sure the connector is tucked into the cable channel at the bottom of the motherboard.