Print steps

T Rear Cover removal

Before you begin: First remove the USB dongle cap, the right rear cap, the left rear cap, and the stand.

Steps

1. Remove the four screws securing the T rear cover to the unit.
2. Grasp one of the top corners of the T rear cover and push up while pulling out to disengage the corner.
3. Pull the cover off of the unit.

T Rear Cover replacement

Steps

1. There are two tabs on the bottom of the T rear cover that fit into two slots on the main rear cover.  
2. There are also several small tabs along the top of the T rear cover that fit into slots on the main rear cover.
3. To replace the T rear cover, insert the bottom tabs into their slots.
4. Slide the cover down and press along the top of the cover until all the top tabs have snapped into place.
5. Replace the four screws.