Print steps

Right Side Cap removal

Before you begin: First remove the USB dongle cap and the right rear cap.

Steps

1. Detach the two screws for the right side cap.
   
2. Use a flat head screwdriver to pry up the latch securing the cap to the rear cover.
3. Rotate the cap off of the unit.

Right Side Cap replacement

Steps

1. The right side cap has several slotted tabs that fit into slots on the front bezel.
2. The right side cap also has a latch that attaches over a slot on the rear cover.
3. To replace the right side cap, align the slotted tabs over the slots on the bezel.
4. Rotate the cap and press until the latch snaps into place.
5. Press the cap edges to make sure it is correctly in place.
6. Replace the two screws for the right side cap.