Print steps

Right Rear Cap removal

Before you begin: First remove the USB dongle cap.

Steps

1. Pull off the screw cover at the top edge of the cap.
2. Remove the screw for the right rear cap.
3. Slide the right rear cap towards the middle of the PC.
4. Pull off the cap.

Right Rear Cap replacement

Steps

1. There is a tab on the top side of the right rear cap with a screw hole that slides under the screw hole on the rear cover.
2. There are also several small tabs on the top and bottom edges of the cap that fit into slots on the rear cover.
3. To replace the right rear cap, slide the screw tab on the door under the hole on the frame. 
4. Press the right rear cap down against the rear cover so the tabs align into their slots.
5. Slide the cap out to the side until the screw hole on the cap and the rear cover align.
6. Replace the screw for the right rear cap.
7. The screw cover has two small tabs that fit into slots on the rear cover.
8. Press the screw cover tabs into the slots to snap the screw cover into place.