Print steps

Left Rear Cap removal

Before you begin: First remove the USB dongle cap.

Steps

1. Pull off the screw cover at the top edge of the left rear cap.
2. Remove the screw for the left rear cap.
3. Slide the left rear cap towards the middle of the PC
4. Pull off the left rear cap.

Left Rear Cap replacement

Steps

1. There is a tab on the top side of the left rear cap with a screw hole that slides under the screw hole on the rear cover.
2. There are also several small tabs on the top and bottom edges of the cap that fit into slots on the rear cover.
3. To replace the left rear cap, slide the screw tab on the cap under the hole on the frame. 
4. Press the cap down against the rear cover so the tabs align into their slots.
5. Slide the cap out until the screw hole on the cap and the rear cover align.
6. Replace the screw for the left rear cap.
7. The screw cover has two small tabs that fit into slots on the rear cover.
8. Press the tabs of the screw cover into the slots on the rear cover to snap the screw cover into place.